Repair scratches wing mirror casings

Find your project

Repair scratches wing mirror casings

Apply pre-paint dergreaser wax remover solution to the wax from your car’s paint as well as the paint from the other car. Use a cloth or towel to apply this solution, rubbing thoroughly. As you can see, it comes off easily revealing the scratches beneath.

Clean out he scratches with your Dremel 8200 with SpeedClic Mandrel and SpeedClic abrasive Brush, moving and clean out the flaking paint chips in the scratch. It is best to use a speed of 15,000 RPM.

Mask up around the affected area with brown paper or newspaper and spray on primer before spraying on your factory color-matched automotive paint to the affected area. Let the first coat dry and then apply another one or two coats as needed. Let dry and then apply a coat of polish and wax to the vehicle to match your existing finish.

  • Dremel EZ402 EZ Lock Mandrel (Silver)

    SC402 Speed Clic Mandrel Show details
  • Dremel EZ473SA 220 Grit Dremel Detail Abrasive Brush Fine

    EZ473SA Detail Abrasive Brush Show details
  • Pre-paint degresser wax remover solution
  • Cloth or towel
  • Spray-on metal paint primer
  • Spray-on factory color-matched automotive paint
  • Car polish and wax
  • Brown paper or newspaper